150mm Bolt Down Metpost - Galvanised - Bolt Type

Concrete Block 100mm (4") Thick

This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 100 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 100mm depth

- 10 Blocks per sq metre (Including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)

215 x 100 x 65mm Concrete Common Bricks (448 per pack)

High-quality concrete common bricks with a smooth finish, ideal for a wide range of general building and masonry applications. Suitable for both trade and DIY use, these bricks provide strength, durability, and consistent performance on site.

Product Information:

- Size: 215mm (L) x 100mm (W) x 65mm (H)

- Approx. 60 bricks per m² (based on 10mm mortar joints)

- Pack size: 448 bricks

- Smooth texture finish

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Simpson Strong-Tie Adjustable Angle Bracket - 70mm x 55mm x 30mm

EFIXR angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXR stiffener improves rigidity particularly for large models.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

Truss Clip - 47mm

The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Product Information:

- TCP Truss Clips may be used for general purposes, to resist uplift wherever one member crosses another.

- Speed prong provides temporary attachment for ease of installation.

- Obround holes for easier nail driving.

- Pre-galvanised mild steel

Mini Hanger - 47mm

The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.

Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.

Product Information:

- Pre-galvanised mild steel.

Nylon Insert Nut - 10mm

Nylon insert nuts are an economical means of combatting loosening from vibration. A nylon neck situated at the top of the nut, is slightly narrower than the thread; as the nut is tightened, the nylon grips the corresponding thread.

Product Information:

- Metric coarse thread DIN 985 Type T

- The bolt threads into the nylon material located at the top of the hex nut

- The nut then "self-locks" and prevents loosening from vibration

- High tensile steel Grade 8.8

- Zinc coated for corrosion resistance

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

Timco 100mm x 100mm Fence Post Cap - Galvanised

Fence post caps create the perfect decorative finish to the top of fence posts and also protect the top of the fence post from weather.

Product Information:

- Perfect decorative finish to the top of fence posts

- Protects the top of the fence post from weather damage

- Can be painted over to match with a different fence colour

- To suit post size (mm) - 100 x 100

Grange Superior Lap Fence Panel Pressure Treated Green 0.9m x 1.83m

A new and improved overlap panel constructed using double waney edge slats that are secured into a neat rebated frame, making it stronger than a traditional panel. offering protection against wood rot and decay. 

Dimensions (H x W x D) - 90 x 182.8 x 4 (cm)