100mm x 750mm Drive In Post Spike - Bolt Type - Galvanised

Drive in Post Spike - Bolt Secure - Hot Dipped Galvanised - 100mm x 750mm

Drive in post spikes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. The bolt secure version features 2x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement, as well as allowing for over / under sized post tolerance. Designed to allow for removal of the post at a later stage if required.

Product Information:

- Features a 4 fin steel spike to ensure a solid, permanent, wind resistant fit

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

- Suitable for 6ft fencing

SKU: PSB100750G

Availability: In stock

£10.90 ex VAT

Qty:

i h

Overview
Reviews

Drive in Post Spike - Bolt Secure - Hot Dipped Galvanised - 100mm x 750mm

Product Information:

- Features a 4 fin steel spike to ensure a solid, permanent, wind resistant fit

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

- Suitable for 6ft fencing

0 review(s)

Write your own review Close

Product can be reviewed only after purchasing it
Only registered users can write reviews

Product tags

Customers who bought this item also bought

75mm x 75mm (Nominal) Green Treated Fence Post 1.8mtr

75X75TR1.8

UC3 Treated Sawn Timber - 75mm x 75mm - 1.8 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 1.8mts

£4.69 ex VAT

Grange Superior Lap Fence Panel Pressure Treated Green 1.8m x 1.83m

GSLG6

Grange Superior Lap Fence Panel Pressure Treated Green 1.8m x 1.83m

A new and improved overlap panel constructed using double waney edge slats that are secured into a neat rebated frame, making it stronger than a traditional panel. offering protection against wood rot and decay.

Dimensions (H x W x D) - 180 x 182.8 x 4 (cm)

£31.50 ex VAT

20kg O'Brien Postmix Postcrete

OBPM

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

£6.12 ex VAT