100mm Full Round Machined Treated Pointed Post 1.8mtr

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

UC3 Treated Sawn Timber - 100mm x 100mm - 1.8 Metres

Treated 4" x 4" Sawn green fence post.

Product Information:

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 100mm x 100mm

- Length: 1.8mts

1/2 Half Round 100mm UC3 Treated Green Pointed Fence Post - 1.8mtr

Rounded pressure UC3 treated Green half round 100mm diameter x 1.8mts long pointed fence post.

Product Information:

- Profile: Half Round & Pointed.

- Treatment: UC3.

- Colour: Green.

- Diameter: 100mm.

- Length: 1.8mts.

Whitewood Timber - 22mm x 50mm Planed - 5.4 Metres

This whitewood timber is used for various construction purposes and is of excellent quality originating from Sweden, It offers a price advantage over European redwood.

Swedish Whitewood PSE timber finished size (18mm x 45mm)

Product Information:

- Country of origin: Sweden

- Material: European Whitewood Spruce

- Kiln dried:  15% > 18%

- Surface finish: Planed

- Machined from / size: 22mm x 50mm

- Finished size: 18mm x 45mm

- Length: 5.4 metres