100mm (4") Tower Bolt - Galvanised

Whitewood Timber - 22mm x 75mm (Planed & Treated) - 4.2 Metres

This treated whitewood timber is used for various purposes and is of excellent quality originating from Sweden.

Product Information:

- Country of origin: Sweden

- Material: European Whitewood Spruce

- Treatment: UC3

- Kiln dried:  15% > 18%

- Surface finish: Planed

- Machined from / size: 22mm x 75mm

- Finished size: 18mm x 70mm

- Length: 4.2mts

38mm x 88mm Fencing Rail Treated UC3 Green - 3.6mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 3.6 metre

25mm x 50mm BS5534 Engineered Roofing Batten Treated - 4.8 Metres

Roofing batten engineered produced in Sweden BS 5534 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 5534 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Gold

- Surface finish: Sawn

- Machined from / size: 25mm x 50mm

Whitewood Timber - 22mm x 150mm (Planed & Treated) - 4.2 Metres

This treated whitewood timber is used for various purposes and is of excellent quality originating from Sweden.

Product Information:

- Country of origin: Sweden

- Material: European Whitewood Spruce

- Treatment: UC3

- Kiln dried:  15% > 18%

- Surface finish: Planed

- Machined from / size: 22mm x 150mm

- Finished size: 18mm x 145mm

- Length: 4.2mts

10" Easy Fix Light T-Hinge - Zinc Plated (Per Pair)

Ideal for interior use. Can be used externally.

Product Information:

- Style: T hinge

- Finish: Zinc Plated

- Sizes: 250mm

- Price shown is per pair

Ring Gate Latch 150mm Galvanised Finish

Galvanised 150mm finish ring gate latch

Product Information:

- Style: Round loop handle

- Application: Internal doors, external doors, gates

- Turn activated handle

- Durable galvanised finish

Irwin Jacksaw 880+ Handsaw 20"

- Razor sharp triple ground teeth with unique cutting angle for use in all materials.

- Cuts on the push and pull. Water-based lacquer gives four times more rust protection.

- Comfortable handle for prolonged use.

Product Information:

- Suitability: Cross and rip cutting.

- Triple ground hard point teeth.

- Optimised universal tooth set pattern.

- Increased gullet size.

4.0 x 30mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.

5.0 x 100mm Velocity Premium Multi Purpose Screw (Pack of 100)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Partially threaded stops the timber jacking.

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.