You have no items in your shopping cart.
Concrete Pre Stressed Lintels 65mm x 100mm - 1.5 mtr
Designed to support a variety of loads including masonry, roof loads, timb er floor loads, concrete floor loads and many more.
Product Information:
- For supporting masonry loads.
- Uniformly distributed roof loads.
- Attic truss loads.
- Concrete floor loads.
- Point loads; compound trusses, steel beams etc.
Concrete Block 100mm (4") Thick
This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.
- 100 mm thick concrete block for construction purposes 7.3 N
- Size: 440mm long x 215mm high x 100mm depth
- 10 Blocks per sq metre (Including 10mm mortar joint)
- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)
Concrete Pre Stressed Lintels 65mm x 100mm - 1.2 mtr
O'Brien Post Mix 20kg Bag
O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.
Cement 25kg Supplied in a Weatherproof Plastic Bag
O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.
- Smooth, uniform finish, and impressive drying performance.
- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.
- Supplied in a plastic based bag.
10mm Steel Reinforcement Bar - 3 Metres
Steel reinforcement bar (also known as Rebar) is a tension device that is added to concrete to help strengthen and aid the concrete under load/tension.
- Diameter: 10mm
- Length: 3mts
Concrete Pre Stressed Lintels 65mm x 100mm - 2.4 mtr
Concrete Pre Stressed Lintels 65mm x 100mm - 2.1 mtr
O'Brien Sand & Cement Mortar Mix 20kg Bag
O’Brien Sand and cement is a dried sand and cement product that is pre-mixed and blended. The pre-mixed ratio is approximately 3 parts sand to 1 part cement using the traditional volume method or 4 parts sand to 1 part cement using the weight method. The individual constituents of this mix meet Irish and European standards for building products. The cement used is O’Brien cement manufactured in Ireland certified to IS EN 197-1 2011.
- Bricklaying
- Block laying
- Pointing
- Repair or maintenance
- Interior or exterior application
Benefits:
- General purpose mortar
- Recyclable showerproof plastic bag
- Simple to mix and use
Insulation Sheets PIR Urethane 2400mm x 1200mm x 100mm
PIR is made by blending together two primary chemicals and other materials to form a rigid foam product.
The heat generated during the reaction enable gases to evaporate and become trapped within cells delivering premium thermal performance characteristics.
- For insulation
- Easy to handle and install
- Lowers energy use
- Resists water vapour
- Size: 2400mm x 1200mm
- Thickness: 100mm
Limestone 10mm Grey Chippings Jumbo Sling Bag 900kg approx
Delivered by one of our crane vehicles in a large nylon bag.
This is a natural product and colour variations can occur.