100 x 65mm Prestressed Concrete Lintel - 1.2mtr

Concrete Block 100mm (4") Thick

This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 100 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 100mm depth

- 10 Blocks per sq metre (Including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)

215 x 100 x 65mm - Concrete Commons (448 per pack)

Concrete common style bricks with a Smooth Texture.

Product Information:

- Size: 215mm long x 65mm high x 102.5mm depth.

- 60 bricks per sq metre (Including 10mm mortar joint).

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

25mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 25mm x 38mm

- Length: 4.8mts

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Insulating Polystyrene Sheet 2400mm x 1200mm x 25mm

Product Information:

- Easy to cut to size using a sharp knife

- Very cost effective and entirely rotproof when correctly installed

- Effectively insulates wall areas which minimises heat loss and reduces energy bills

- Lightweight and easily handled for easy installation

- Can be used underneath concrete sla bs in solid ground floor constructions, and also above or below damp proof membranes

- Manufactured from expanded polystyrene board

- Sheet size: 2400mm x 1200mm

- Thickness: 25mm

10mm Steel Reinforcement Bar - 3 Metres

Steel reinforcement bar (also known as Rebar) is a tension device that is added to concrete to help strengthen and aid the concrete under load/tension.

Product Information:

- Diameter: 10mm

- Length: 3mts

Concrete Pre Stressed Lintels 65mm x 100mm - 1.5 mtr

Designed to support a variety of loads including masonry, roof loads, timb er floor loads,  concrete floor loads and many more.

Product Information:

- For supporting masonry loads.

- Uniformly distributed roof loads.

- Attic truss loads.

- Concrete floor loads.

- Point loads; compound trusses, steel beams etc.