You have no items in your shopping cart.
Universal Cavity Closer - 100mm to 150mm 2.4m
Product Information:
- Multi-width thermal cavity closer
- Suits cavity widths between 100-150mm
- Provides an economical solution to cold bridging problems and can be cut to suit varying cavity widths
- This universal cavity closer not only provides a thermal break to the cavity but also acts as an effective DPC barrier
The product images displayed are for illustrative purposes only and may not fully represent the actual product.
The recommendations regarding the application and intended use of the products are based on our current knowledge and experience, assuming proper storage, handling, and application under standard conditions. All product specifications, information, and data provided on the website are subject to change. While the information provided is believed to be accurate and reliable, it is offered without any guarantee, warranty, or responsibility of any kind.
19mm x 38mm Roofing Batten Treated - 4.8 metres
Roofing batten type A produced in Sweden BS 8417 Certified.
- Country of origin: Sweden
- Species: Spruce
- Grade: BS 8417 certified
- Moisture content: Kiln dried (18% approx.)
- Treatment: UC2
- Colour: Green
- Surface finish: Sawn
- Machined from / size: 19mm x 38mm
- Length: 4.8mts
Standard Plasterboard - Square Edge - 12.5mm x 1200mm x 2400mm
- For ceilings and forming partitions.
- Can be decorated directly or coated with thistle plaster finish.
- Easy to score and snap with a clean cut edge for quick use.
- Ivory paper faced for ease of identification.
- Can be fixed in single or multiple layers which increases acoustic and fire performance.
- Easily fixed on to a wide range of materials with drywall fixings or adhesive.
- 12.5mm thick x 1200mm wide x 2400mm long.
- Square edged.
Thin Coat Galvanised Angle Plastering Bead 3mts
- Galvanized steel
- Perforated forms a perfect key for plaster
- Ideal for a 2 to 3mm skim of plaster
- Promotes strength to corners of plaster board walls
Drywall Screws - PH - Bugle - Coarse Thread - Grey - 3.5 x 32
Used to secure wallboards to stud work.
- Phillips No.2 recess for a positive drive
- Bugle head to reduce likelihood of damaging the board surface
- 25° super sharp point for ease of penetration
- Coarse thread for extreme hold
- Fire Classification - A1
Insulation Sheets PIR Urethane 2400mm x 1200mm x 25mm
PIR is made by blending together two primary chemicals and other materials to form a rigid foam product.
The heat generated during the reaction enable gases to evaporate and become trapped within cells delivering premium thermal performance characteristics.
- For insulation
- Easy to handle and install
- Lowers energy use
- Resists water vapour
- Size: 2400mm x 1200mm
- Thickness: 25mm
Hi-Tac Self Adhesive Fibre Glass Tape - 50mm x 90mts
Hi Tac self adhesive drywall tape for the drywall professional, ultimate adhesion guaranteed.
- Is a multi purpose mesh tape for use in plaster board jointing, and for repairs
- Designed to reinforce the plaster board joint and is suitable for all types of plaster boards
- As it is a self adhesive product time is saved on installation compared to traditional scrim products
- Hi-Tac uses a much higher gl ue content than other fibr eglass tapes, and therefore provides a far superior adhesion in colder temperatures
5.0 x 70mm Velocity Premium Multi Purpose Screw (Pack of 200)
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.
- Dual angle thread designed for superior hold
- Partially threaded stops the timber jacking.
- Rapid drive twist cut enhances drive performance
- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.